BGT Stability Gold Prototype Putter Shaft

This Black & Gold Stability R&D Prototype Shaft. The design and technology are the same as the current Stability Shaft, however there are some slight differences.

Original Stability (blue) vs Gold prototype-
*Chrome tips only (no black)
*The weighting is slightly heavier, which will increase the swingweight.
*This product does not have a stop gap so installation will be slightly different (step #4)-

Steps

1. Abrade 2″ at the end of the tip
2. Epoxy tip to inside connector
3. Remove excess epoxy
4. Insert tip to a depth pf 2.25″ and wrap/tape in place. If not secured until dry you’ll loose the tip inside the shaft. There is no stopper.